Wixey WR500 ELECTRONIC DIGITAL READOUT Bedienungsanleitung

1Wixey ELECTRONIC DIGITAL READOUT Model WR500 INSTRUCTIONS Step 1- Mounting the readout assembly to your plane

10Delta 22-580 13” Planer: Prepare the side cover as shown at the left and then return to page 1 step (5). Trouble Shooting: If the readout ever

2 Peel the paper backing off the 2 foam tape adhesive strips that are attached to the back of the frame of your digital readout (7). Hold the frame

3Step 2- Attaching the mounting bracket Attach the mounting bracket to the front of the planer where the scale cursor was mounted using the cursor s

4Step 3 Understanding the buttons on your electronic digital readout. • IN/MM- Pushing this button switches the display mode for measuring i

5 • INC/ABS- This button switches the readout from ABS (absolute) to INC ( incremental) measuring mode (16). ABS (absolute

6Step 4 Calibration Calibrating the readout will set the device to display the exact distance from the bed of the planer to the tips of the planer

7 Measuring the thickness of any board. Press the ABS/INC button until the INC appears above the displayed reading (21). The reading now will

8Removing a precise amount of material from a board being planed. If you are in the process of planning wood and after repeated passes a point

9Setting your cutter head to the height of a board of unknown thickness. If you have a board of unknown thickness and the cutter head of the plan